There are several different Installation and Operation Instruction sheets for the Delta Style, BAPI-Stat 2 (no display) and BAPI-Stat 4 (no display) room units based on the sensor type and the options that you’ve selected. The chart below shows a graphic of the individual circuit board and a description of the unit, along with a link to the appropriate Installation and Operation Instructions file. If you would like assistance in selecting the proper instruction sheets for your specific room unit, please call BAPI technical support at +1-608-735-4800 or e-mail your request to bapitechsupport@ www.bapihvac.com. Please refer to the BAPI part number on the label of the unit itself when requesting the instruction sheets.
Individual Installation and Operation instructions are included in the box of each unit which requires power to operate. An additional set of Installation and Operation instructions for all products in the order is included with the order as a “job manual” which is located in the top of the shipping container.
| Printed Circuit Boards, Unit Description and Instructions File | ||
 |
 |
 |
| Description Thermistor or RTD sensor ONLY. Instructions 9524_ins_therm_rtd_rm.pdf |
Description Room sensor with temperature sensor, optional setpoint, override, test & balance switch and C11 or C35 communications jack. Test and Balance Switch. Instructions 9522_ins_uni6_rsoc.pdf |
Description Siebe, Barber Colman & Invensys Compatible with optional setpoint, override, test & balance switch and C35 or C11/C12 communications jack. Test and Balance switch. Instructions 9548_ins_uni7_rsoc.pdf |
 |
 |
 |
| Description Room sensor with temperature sensor, optional setpoint, override, test & balance switch and C35 or RJ45 communications jack. Test and Balance switch. Instructions 10663_ins_uni8_ rsoc.pdf |
Description Control Systems International Micro Regulator Compatible with setpoint, override, test & balance switch and C35 communications jack. Test and Balance switch. Instructions 9542_ins_10K2_CSIMR_RSOC.pdf |
Description Control System International compatible room sensor with 592 or 592-10K temperature sensor. Setpoint slider, override and C11/12 communications jack. Instructions 8586_ins_592_rm_set_or_cj.pdf |
|
 |
|
| Description Control System International compatible room sensor with LM334 temperature sensor, setpoint, override and C11/C12 communications jack. Instructions 9615_ins_LM334_Room_Set_OR_CJ.pdf |
Description Alerton compatible room sensor with sensor and C35 communications jack. Instructions 12944_ins_3K_AT_rc.pdf |
Description 592 sensor only. Instructions 9557_ins_592_Room.pdf |
 |
||
| Description LM334 sensor only. Instructions 9613_ins_LM334_Room.pdf |
||
