Filter

  • PDM - Power Distribution Module

    PDM – Power Distribution Module

    The PDM – Power Distribution Module is a low voltage (12 to 30V AC/DC) power distribution module designed to take(...) Read More
    List Price Starting At: $182.00$364.00
    Configure This product has multiple variants. The options may be chosen on the product page
  • PS17RF, PS18RF and PS19RF Power Supplies

    PS17RF, PS18RF and PS19RF – Power Supplies

    The PS17RF, PS18RF and PS19RF Power Supplies provide multiple 33 VDC outputs with over-current protection and self-resetting fuses.  All power(...) Read More
    List Price Starting At: $265.00$413.00
    Configure This product has multiple variants. The options may be chosen on the product page
  • PMPB5 - Pulse Meter Pulse Buffer Module Mounted in Optional Snaptrack

    PMPB5 – Pulse Meter Pulse Buffer

    The PMPB5 receives the pulse output from electrical, water or gas meters and recreates the pulses as dry contact closures(...) Read More
    List Price Starting At: $28.00$33.00
    Configure This product has multiple variants. The options may be chosen on the product page
  • TS1 and TS2 Transient Suppressor Modules Mounted in Optional Snaptrack

    TS1 and TS2 Transient Suppressors – Digital / Analog Input Points

    The TS1 and TS2 provide protection from electrical transients (temporary excess voltage or current) and reduce the possibility of damage(...) Read More
    List Price Starting At: $8.00$13.00
    Configure This product has multiple variants. The options may be chosen on the product page
  • DS8 - Discrete Summary Module, 8 Input

    DS8 – Discrete Summary Module, 8 Input

    The DS8 module accepts up to eight dry contacts and provides a single dry contact signal to the controller when(...) Read More
    List Price Starting At: $95.00
  • EA1 - Actuator Interface, 2 Position

    EA1 – Actuator Interface, 2 Position

    Each EA1 module can control two actuators from a single controller output and provide a summary dry contact status when(...) Read More
    List Price Starting At: $105.00
  • EA2 - Actuator Interface, Modulating

    EA2 – Actuator Interface, Modulating

    Simplifies wiring and troubleshooting of “Belimo” style modulating actuators with voltage feedback. The EA2 Module shows the actuator position based(...) Read More
    List Price Starting At: $87.00
  • OAM - Output Adjust Module

    OAM – Output Adjust Module (for the EA2 Module)

    Plugging the OAM accessory module into a BAPI EA2 Module allows you to stroke your actuator to any position without(...) Read More
    List Price Starting At: $23.00
  • CDSP2 - Carbon Dioxide Sensor Power Supply

    CDSP2 – Carbon Dioxide Sensor Power Supply

    Many facilities use Carbon Dioxide (CO2) sensors for demand controlled ventilation. Although BAPI makes CO2 sensors that can run on(...) Read More
    List Price Starting At: $130.00
  • SQ4-RA Module

    SQ4 – Sequencer, 4-Step

    The SQ4 Module simplifies the job of proportional control of cooling towers with multiple two-speed fans, staged electric heat units(...) Read More
    List Price Starting At: $105.00$280.00
    Configure This product has multiple variants. The options may be chosen on the product page
  • 3324VC Voltage Converter

    3324VC – Voltage Converter, 1.5 Amp

    Some of BAPI’s ETA products require regulated power of 12 or 24 VDC, including the FOX and SOX – RS-485(...) Read More
    List Price Starting At: $120.00
  • R49 - Relay Interface, 9 Output

    R49 – Relay Interface, 9 Output

    The R49 conserves critical controller space by turning on or off up to nine relays using only one controller output. Read More
    List Price Starting At: $125.00