Site verification is a key step in ensuring your BAPI Wireless System works at its optimum level. We recommend that all wireless customers conduct a site verification and send the information to BAPI prior to installing the system. Our experts will review the data and follow up with an approval or recommendations if needed.

Wireless systems purchased without a site verification do not qualify for the “BAPI Backed” product credit warranty which offsets your labor costs for repairing or replacing of BAPI products.

To conduct the site verification, download the Wireless Site Verification Instructions Document and follow the steps. You will need at least one BAPI BLE Wireless Sensor/Transmitter for the verification. If you do not have a BAPI sensor/transmitter, then BAPI recommends purchasing a BAPI-Stat “Quantum Slim” Temperature Sensor/Transmitter for the current and future site verifications. The Part Number is: BA/WT-BLE-QS-W-IS-BAT.

The verification also requires a floor plan of the proposed building with the sensor locations and the signal strengths at those locations marked on the floor plan. If you cannot obtain a floor plan for the location, then send a document or spreadsheet that includes each sensor’s location, the distance from the receiver or gateway for that sensor, and the measured signal strength for that sensor. Include this for all of the proposed wireless sensors.

Once you’ve completed the verification, scan or photograph your marked up floor plan (or your csv spreadsheet list if you do not have a floor plan) and upload that file using the form below. Our experts will review the data and follow up with an approval or recommendations if needed.

Download the
BAPI BLE Scanner

Site verification requires a BAPI BLE wireless sensor/transmitter and a smart phone. If you do not have a BAPI sensor/transmitter, then BAPI recommends purchasing a BAPI-Stat “Quantum Slim” Temperature Sensor/Transmitter for the current and future site verifications. The Part Number is: BA/WT-BLE-QS-W-IS-BAT.