BAPI NIST Traceable Certificate of Calibration Overview – Application Note


NIST (National Institute of Standards and Technology) Traceability can be defined as an unbroken record of documentation (“documentation traceability”) for the measurement device authenticity and an unbroken chain of measurements (with documentation with associated uncertainties) back to the original standard kept at the U.S. National Standards Offices.

A standard used for NIST traceable certification is only valid if the following conditions are met:

  1. An unbroken chain of measurements back to NIST standards is maintained.
  2. Each step of the chain has known and documented uncertainties.
  3. There is a quality system to ensure that the thermometers and associated measurement equipment maintain their measurement uncertainty (accuracy).

BAPI offers our customers an “NIST Traceable Certificate of Calibration”.  Many in the HVAC industry erroneously call this an “NIST Certification”, “NIST Certified” or “NIST Certificate” which is the wrong terminology and could be misleading.

NIST Certified Value:

An NIST Certified Value is a value reported on a Standard Reference Material Certificate or certificate of analysis for which NIST has the highest confidence in its accuracy in that all known or suspected sources of bias have been fully investigated or accounted for by NIST. (NIST SP 260-136).  This is typically the U.S. National Standards Offices end standard to which BAPI test equipment is traceable too.

BAPI Calibration Equipment Standards

All equipment used to verify accuracy at BAPI is maintained in our master calibration database and has an NIST Traceable Certificate.  All of our equipment is re-calibrated and re-certified at appropriate intervals based on the manufacturer’s recommendations, degree of usage, type, and past calibration history. Typically all are re-certified at regularly-scheduled intervals of six months, one year or two years.  This includes our Volt/Ohm Meters, Precision Resistance Decade Boxes, Environmental Chambers, Reference Thermometers, Humidity References, Pressure References, Calibration Gasses and Caliper Type Measurement Devices.

When BAPI issues an NIST Traceable Certificate of Calibration, all the test equipment used to verify accuracy is listed on the issued certificate.  The BAPI NIST Traceable Certificate of Calibration also shows the last time the test equipment was re-certified with its own NIST Traceable Certificate of Calibration thus maintaining the traceability all the way back to the NIST Certified Value.

If you have any questions, please call your BAPI representative.


Printable pdf Version of this Application Note

Leave a Reply

Your email address will not be published.