The Low Profile “Button” Sensor is ideal for locations where aesthetics are as important as the temperature measurement. The inconspicuous room sensor mounts easily by pushing through a 3/8″ hole and secured with a peel off tape strip. The only visible portion is a flush 7/8″ dot on the wall.
The Button Sensor is available in multiple thermistor or RTD sensors as shown in the specifications. Other sensor types are available on request.
- Small Flush Sensor Mounting
- Accurate Direct Air Measurement
- Paintable with Latex or Oil Base
- Wide Selection of Sensing Elements
- Plenum Rated Wiring
- Limited Lifetime Warranty
