HVAC/R Sensors
Company Overview
Catalog/Price Book
Instruction Sheets
Ordering & Shipping
BAPI Distributor List
Contact Us
Building Automation Products, Inc.,
Tel: +1-608-735-4800
Fax: +1-608-735-4804
Copyright © 2007 BAPI
• 8 Year Battery Life (with two 3.6 volt lithium batteries, full AA size) • Built In Error Detection • 100 ft range, extendable to 1,000 feet with Repeater • Transmitted signals can be converted to Voltage, Current or Resistive Output |
 |
The BAPI Wireless Temperature or Temperature/Humidity Combination system incorporates a 418 MHz transmitter along with a Receiver and one or more Analog Output Modules to send zone temperature and humidity to the DDC controller.
The wireless transmitter has a minimum in-building range of 100 feet, extendable to the 1,000 feet with a Repeater. The transmitter uses two high-capacity 3.6 volt lithium batteries and has an estimated battery life of 8 years with a transmit rate of approximately once every 10 seconds.
The wireless transmitter has a minimum in-building range of 100 feet, extendable to the 1,000 feet with a Repeater. The transmitter uses two high-capacity 3.6 volt lithium batteries and has an estimated battery life of 8 years with a transmit rate of approximately once every 10 seconds.
 Room TransmitterMeasures the room temperature or temp./humidity and transmits the data through 418MHz RF to a Receiver. Now with Setpoint & Override! |
 Duct Transmitter Measures the Duct temperature or temperature/humidity combination and transmits the data through 418MHz RF to a Receiver. |
| Immersion Transmitter Measures the temperature and transmits the data through 418MHz RF to a Receiver. |
 Remote Probe Transmitter Measures the temperature and transmits the data through 418MHz RF to a Receiver. |
 Outside Air TransmitterMeasures the Outside Air temperature or temperature/humidity combination and transmits the data through 418MHz RF to a Receiver. |
 Wireless Receivers Receives the RF signal from one or more transmitters or repeaters, and outputs the data to an Analog Output Module. |
 Analog Output Modules Converts the data from the Receiver into a resistance, voltage or current for the DDC controller. Receives data through a four-wire bus. |
 Wireless Repeater Receives the 418 MHz RF signal from one or more transmitters which have a range of 100 feet. The Repeater re-transmits the signal at 900 MHz to a distance of 1,000 feet to a 900 MHz Receiver. |
Wireless Line receives 2nd AHR Expo Innovation Award BAPI's expanded line of Wireless Temperature and/or Humidity sensors was awarded an Honorable Mention in the 2008 AHR Expo Innnovation Awards Competition in November. BAPI's initial line of wireless room sensors received an Honorable Mention in the 2007 AHR Expo Innnovation Awards Competition. The expanded line includes duct, immersion, outside air and remote sensors. BAPI's unique system extends the battery life of the wireless transmitter to 8 years while maintaining the in-building range of 100 to 150 feet, which led to the two awards. |
|