|
HVAC/R Sensors
Company Overview
Catalog/Price Book
Instruction Sheets
Ordering & Shipping
BAPI Distributor List
Contact Us
Building Automation Products, Inc.,
Tel: +1-608-735-4800
Fax: +1-608-735-4804
Copyright © 2007 BAPI |
PS17 & PS17CB - Power Supplies
Electronic Technician Assistant (ETA)
The PS17CB Power Supply with Circuit Breakers provides up to six 33 VDC power supplies with circuit breakers to operate any of the BAPI ETA modules except the FOX & RPTR RS-485 communication modules. Each PS17CB output has a green LED, which lights to show normal power. Both power supplies fit standard 2.75” snaptrack
The PS17CB uses a 120 VAC to 24 VAC transformer with a rating of 75VA to 400 VA depending upon current consumption. Total your current consumption and pick the appropriate transformer from the table below.
The PS17CB provides a transient line filter for the 120 VAC input to the transformer. Screw terminals on the PS17CB allow convenient termination of the input and output of the transformer. Plug a standard computer power cord into a duplex outlet and then into the line filter to power the PS17CB. A green LED lights when 120 VAC is applied and the circuit breaker is not tripped.
Datasheets (PDF) |
|
List Pricing (PDF) |
|
|
|
|
Installation and Operation Sheets (PDF) |
|
|
Return to Entire ETA Product Line
|
PS17
Power Supply Fuse Block
PS17CB -
Power Supply with Circuit Breakers
|
ASSOCIATED ETA PRODUCTS
 |
TRK18 - Snaptrack
All good projects need a proper foundation and the ETA modules are no exception. The TRK18 - Snaptrack provides a sturdy, secure and easy mounting method for the ETA line. |
BP2, BP4 or BP8 - Interface Backplane
The BP2, BP4 and BP8 Backplanes provide a convenient way to mount and power the BAPI ETA interface devices which helps cut down on control panel and control room clutter. Connectors on the face of each Backplane plug into mating connectors on the ETA modules. The BP8 accommodates eight modules while the BP4 accommodates four modules and the BP2 accommodates two modules. |
 |
|
|