HVAC/R Sensors

Company Overview
Catalog/Price Book
Instruction Sheets
Ordering & Shipping
BAPI Distributor List
Contact Us

Building Automation Products, Inc.,
Tel: +1-608-735-4800
Fax: +1-608-735-4804

Copyright © 2007 BAPI

  BAPI makes a NEMA 1 and NEMA 4X 14-gauge painted steel enclosure in the 44”x20”x8” size. The NEMA 1 model weighs approximately 90 pounds, while the NEMA 4X watertight model features a door seal with latches and weighs approximately 95 pounds.
  Two permanent dividers provide a wireway for input and output conduit connections at the top of the enclosure and a high voltage compartment at the bottom of the enclosure for the power supply.
  Flipping the enclosure 180 degrees accommodates left and right hand door openings. No knockouts are provided; drill and punch where you need conduit openings.
  Each NEMA 1 and NEMA 4X models come with a Large Backplate (BP185X285), a Small Backplate (BP6X185) and two Bracket Cable Guides (BCG).
  Both models are UL50 rated and carry a UL sticker. Enclosures are suitable for use in UL508 panels.

  The BAPI 32208N1S is a NEMA 1, 14-gauge painted steel enclosure that weighs approximately 68 pounds. Two permanent dividers provide a wireway for input and output conduit connections at the top of the enclosure and a high voltage compartment at the bottom of the enclosure for the power supply.
   Flipping the enclosure 180 degrees accommodates left and right hand door openings. Mount the enclosure by drilling holes in the back to fit your application. No knockouts are provided; drill and punch where you need conduit openings.
   Each BAPI BA/32208N1S comes with a medium backplate (not sold separately), a Small Backplate (BA/BP6X185) and two Bracket Cable Guides (BA/BCG).
   Each BAPI enclosure is UL50 rated and carries a UL sticker. Enclosures are suitable for use in UL508 panels
   The enclosure measures 32" high, 20" wide by 8" deep.

  The BAPI 20208N1S is a NEMA 1, 14-gauge painted steel enclosure that weighs approximately 47 pounds. One field-installed divider provides a high voltage compartment in the enclosure to isolate a power supply.
   Flipping the enclosure 180 degrees accommodates left and right hand door openings. Mount the enclosure by drilling holes in the back to fit your application. No knockouts are provided; drill and punch where you need conduit openings.
   Each BAPI 20208N1S comes with a backplate and two Bracket Cable Guides (BCG).
   Each BAPI enclosure is UL50 rated and carries a UL sticker. Enclosures are suitable for use in UL508 panels.
   The enclosure measures 20 " high, 20" wide by 8" deep.

Return to Entire ETA Product Line

44"x20"x8"
NEMA 1X Steel Enclosure

32"x20"x8"
Steel Enclosure

20"x20"x8"
Steel Enclosure