BAPI ETA DS6R Module

DS6R - Dry Switch Monitor
Electronic Technician Assistant (ETA)

The DS6R module monitors six dry switch closure devices and provides one resistive output to the controller.
Each switch closure subtracts a precise resistance from the output so a simple subtraction algorithm at the controller decodes which switches are set. Each switch terminates on an independent plug on the front of the DS6R module and an LED associated with each input indicates switch closure for simple troubleshooting.
The DS6R plugs into the BP2, BP4 or BP8 backplane.

Datasheets (PDF)

DS6R Datasheet

List Pricing (PDF)

DS6R List Pricing

Installation and Operation Sheets (PDF)

DS6R Instructions

DS6R-10K Instructions

VISIO Files (2002 version)

Half Scale ETA VISIO File (3 Meg, includes entire ETA Line)

Full Scale ETA VISIO File w/ Wiring Connections (21 Meg, includes entire ETA Line)

VISIO Files (2003 version)

Half Scale ETA VISIO File (800K, includes entire ETA Line)

Full Scale ETA VISIO File w/ Wiring Connections (3 Meg, includes entire ETA Line)

Return to Entire ETA Product Line

DS6R - Dry Switch Monitor

ASSOCIATED ETA PRODUCTS

PS17 or PS17CB - Power Supply Fuse Blocks
Each PS17 or PS17CB provides up to six fused or breakered 33 VDC power supplies to operate any of the BAPI ETA modules except the FOX & RPTR RS-485 communication modules.

TRK18 - Snaptrack
All good projects need a proper foundation and the ETA modules are no exception. The TRK18 - Snaptrack provides a sturdy, secure and easy mounting method for the ETA line.

BP2, BP4 or BP8 - Interface Backplane
The BP2, BP4 and BP8 Backplanes provide a convenient way to mount and power the BAPI ETA interface devices which helps cut down on control panel and control room clutter. Connectors on the face of each Backplane plug into mating connectors on the ETA modules. The BP8 accommodates eight modules while the BP4 accommodates four modules and the BP2 accommodates two modules.